 Friends links |
|
| Picture |
Heading |
Updated |
 |
Silver-aluminium Alloys
Aluminum alloy solders are applied for joinning aluminum to aluminum alloys. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to be removed, furthermore the brittle intermetallic compounds formed by |
2017-10-24 |
 |
Pure Copper Paste
Pure copper brazing can be made into paste. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. The roduct is suitable for brazing copper, bronze and steel, etc. |
2017-10-11 |
 |
Silicon Brass
Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should |
2017-10-10 |
 |
Silver Power
The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。 |
2017-09-20 |
 |
Tin Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. |
2017-09-19 |
 |
Sn-In Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-09-14 |
 |
Powdered Brazing Flux
Flux has lower melting point than brazing filler metal, good surface activity. It can break or dissolve metallic oxides on the surface of work and brazing alloys during the process, which is good for the liquid brazing alloy wetting the surfaces to permit |
2017-08-19 |
 |
Brass Solder
Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well |
2017-08-12 |
|
